2021 Sabre 48 Salon Express

• Sabre Pilot door on Helm
• Stidd Helm Seats 
• Volvo Joy Stick Control on helm seat arm rest
• Garmin Fanton 54 Radar 
• Garmin AIS800 w/8" antenna
• Garmin GM120 data display
• Garmin GC 200 Engine room camera
• Garmin GC 12 camera for 3rd stateroom
• Airman DT800 smart transducer
• Icom M506 VHF w/8' antenna 
• Hailer Horn
• ACR RCL 100 remote spot light
• Flir MD625 camera 
• Sierra wireless  cellular internet system
• Color match all hardtop equipment
• Mast on hardtop

• Modified Deep “V” Planing hull design, with pod drive tunnels for Cummins Zeus drives
• 14º deadrise at transom, 23º deadrise amidships.
• ISO NPG white gelcoat w/vinylester backup resin.
• Bottom, topsides and transom VIP resin infused biaxial E-glass with Corecell SAN foam core.
• Stringer system biaxial E-glass with foam core.
• Resin Infused E-glass swim platform with molded-in anti-skid surface.
• Hull side rubbing strakes.
• White PVC rub rail with stainless steel cap.
• Painted (Urethane) double boot top.
• Gold recessed cove stripe.

• ISO NPG gelcoat.
• VIP resin infused biaxial E-glass with balsa core.
• Molded-in anti-skid deck surfaces.
• Companionway door to port.
• Sliding windows in salon on cabin sides.
• Electric opening window in salon aft bulkhead.
• Hinged access door to side deck at helm.
• Flush, outward opening, transom door with latch.
• Anchor locker with slam latch.
• Large lazarette/engine room access hatch in cockpit sole with compression latches.
• Integrated Sure Shade system over cockpit

• 1 1/4″ Diameter type 316 stainless steel perimeter rail system.
• (6) 12” Stainless steel cleats: two forward, four mid-ship.
• (2) Stainless steel bollard cleats aft
• (2) Stainless 12″ cleats on cockpit coaming on centerline
• 10” Stainless steel cleat to starboard of windlass as anchor rode tie off.
• (4) Custom cast stainless steel mid-rail line chocks.
• Custom cast stainless steel skene chocks forward.
• Custom stainless steel bow pulpit with dual anchor roller for 44lb CQR or Delta anchor and “lunch hook”.
• Quick anchor windlass, electric rope-chain type
• Teak flag staff and socket on taffrail.
• Burgee staff on bow pulpit.
• (6) Low Profile stainless steel hatches w/screens.
• (6) Custom stainless steel opening port lights.
• Teak toe rails.
• Teak cabin-side eyebrow.
• Teak table in cockpit
• Custom cast stainless steel “SABRE” logo
• Raw water washdown system at the bow.
• Kahlenberg single chrome air horn

• Hinged access door to starboard side deck.
• Dual Volvo-Garmin 8617 Multi-Function Displays (MFDs) w/ Separate SD Card Readers.
• Volvo-Penta Autopilot w/ Joystick Driving.
• Volvo-Penta IPS Plus Joystick Controller on Stidd Armrest.
• Twin Lever Shift & Throttle Control (EVC-E) w/ Single Lever & Cruise Control Software.
• Triple windshield wipers w/ multiple speed settings.
• Windshield washers plumbed from the fresh water system.
• Ritchie Compass.
• Switch controls for horn, running lights, anchor light, engine room blowers, & bilge pumps.
• Custom teak steering wheel w/ tilt helm & Sabre logo.
• Twin Stidd N Series helm seats w/ Ultraleather® fabric mounted on a cherry cabinet
• NMEA 2000 backbone

Located Amidships

Open and well lit with beautiful natural lighting

Atrium effect overhead

Standup Refrigerator with freezer

Large counter top

Stainless steel sink

Electric radiant cook top

Ample Storage  

• Island berth athwartship layout with 9″ foam mattress and laminated trim.
• Hull side deadlight over head board
• Shoji style passageway and closet doors
• Shoji style portlight screen panels
• Cherry hull ceilings.
• Drawers under berth and in bulkhead aft of berth.
• (2) hanging lockers fore and aft of bed.
• Teak and holly sole.
• Sound deadening soft headliner panels.
• Sliding door to master head compartment