2021 Release Boatworks Walk Around

• Ablative/Copolymer anti-fouling bottom paint, 2 coats, primed 

• Blister resistant modified epoxy resin in entire hull skin 
•  Custom blended modified vinylester and polyester resin used in structural laminates & topsides 
• Dockside and overboard pump outs for holding lank 
• DuPont high gloss polyurethane boot stripe 
•  Satin teak interior finish throughout 
• High performance isophithalic gelcoat npg superior gloss, flexibility and outstanding weathering characteristics 
• Hull infused using Airex foam cores with Aramid and Eglass hybrid fiberglass laminates 
• Hull interior isophithalic gelcoat topcoat with a durable high gloss polyurethane coating 
•  Aluminum fuel tank and molded freshwater and holding tanks 
• Molded fiberglass cabin floor/ engineroom ceiling with core for acoustical and thermal insulation \
• Nonskid for traction and durability 
• Stringers, fiberglass encapsulated foam 
• Vacuum infused composite bulkheads - main engineroom bulkhead, intermediate engineroom bulkheads, and forward bulkhead 

   

   

• Air conditioning with reverse cycle heat 
• Headliner
• Cedar Closet
• Main electrical Panel  AC/DC
• Overhead LED Lights
• GE Microwave Oven
• Isotherm Refrigerator 2 Drawer
• Stainless Steel Sink with faucet
• Corian Countertop
• Teak And Holly Flooring
• Rod Locker
• V Birth
• Fusion stereo control

• MAN i-6 800 HP Common Rail engines ( 567 Hours )
• MAN 5 Year Extended Warranty
• Optional Onan 13.5 KW Generator
• Optional Side Power Bow Thruster
• Optional Seakeeper 6
• Air Conditioning - direct expansion zoned with reverse cycle heat for complete climate control throughout the interior 
• 2 Dometic Refrigeration cool box Units
• Bilge pumps with additional clean out pumps on centerline linked into monitoring system and connected to switches for automatic and manual operation 
•  DC power-assist hydraulic steering 
• Engine room ventilation system with supply and discharge fans for proper fresh air supply and water intrusion suppression 
• Fire suppression system tied into main engine and generator temperature, low oil pressure, and generator as well as confirming correct system operation ignition systems 
• Fuel and oil lines, flexible, steel reinforced USCG approved aircraft type. 
• Fuel priming pumps electric 12V DC, for main engines 
• Internal sea strainers for generator 
• Mufflers - engines, in-line type with surge tubes in engineroom 
• Mufflers - generator/lift muffler with gas water separator for cleaner, quieter operations 
•  Oil changing system, gear type pump for main engines, transmissions, and generator 
• PEX plumbing, freshwater system with manifold system shut off 
• Pressurized freshwater system, 12V D/C pump with on deck freshwater fill and cockpit dockside supply inlet with pressure reducing valve 
•  Propellers - Class 'S' pitch tolerance (ISO 484/2) and dynamic balancing. Advanced design cambered blade sections for optimum performance. 
• Racor fuel water separators for main engines and generator 
•  Rudders, including composite rudder bearing and drip-less seal laminated into hull 
•  Seacocks, stainless steel, ball-type sea valves and strainers for all thru-hulls below the water line 
• Shafts - 2 Aquamet high-strength stainless steel, double-taper with machined keyway and thrust plate at main engine 

Bridge - Deck 

• Optional Faux Teak Helm Pod
• Custom Acrylic Black plate for Electronics
•  12V Electric Reel Outlets 30amp ( 4 )
•  22  Gem Lock Rod Holders
• Pompanette Rocket Launcher
• Custom Best Marine Pump Boxes
• Custom Painted Hull 
• Controls: top mounted electronic controls with station select on keypad 
• Engine room access thru hatch in bridge deck 
• Fire system control with automatic and manual discharge and override system at console 
• Optional Helm Pompanette Bench, teak ladder back 
• Optional Cockpit AC
•  MAN Engine Display
•  Manual engine shutdown switches in console 
• Nonskid deck 
• Offshore Systems safety monitoring system with audible and visible alarms: fire, engine room temperature, high bilge water, high exhaust temperature, high coolant temperature, low oil pressure, and generator.
• Port bench seating area L- shaped
• power assist steering

Tower

• Palmbeach Custom Tower
• Double Spreader Outriggers
• Rigger Auto Locks
• Molded Spreader Lights Lumitec
• Recessed Speaker inserts ( 6 )
• Recessed tri-color lights
• Recessed Nav Lights
• Satin Black painted top
• Satin Black Control Box
• Recessed Electronics Boxes with Lids
• Miya Epoch US-9 Electric Reels ( Hardtop )

• 2 - Garmin 22"  8622 Series ( Helm )
• Garmin 12" 8612 Series ( Tower )
• Zipwake control ( Tower )
• Side Power Thruster  control ( Tower )
• Garmin GSPMAP
• Garmin 3KW Transducer
• Garmin Phantom 6' Open Array Radar
• Miya Epoch US-9 Electric Reels
• Zipwake Trim Tabs
• Custom Display
• Icom VHF Radio
• MAN Digital Displays
• Seakeeper Integrated unit control in Garmin
• Fusion Stereo system
• Fusion Signature Series Speakers
• 2 Fusion 8 Channel Digital AMP
• 2 Fusion 4 Channel Digital AMP
• Fusion Control
• 4 Lumitec Quattro  Underwater Lights RGB
• 2 Lumitec Typhoon Underwater Lights RGB

• Optional Teak Deck
• Optional Teak Coaming Boards
• Optional Faux Teak Toe Rail
• Optional Faux Teak Hand Rail
• Custom Dometic  Refrigerated Boxes all 4
• 50 Amp Shore Power Cord
• Dockside water connection with pressure reducing valve under forward gunwale 
• Freshwater wash down with hose bib located under forward gunwale 
•  Gaskets for all lids, doors and access doors 
• Indirect lighting under coaming 
• Backing plate in deck for fighting chair or table 
• Lazarette hatch with access to steering, trim tabs, drains and pumps 
• Observation mezzanine
• 22  Gem Lock Rod holders flush mounted 
• Seawater wash down under gunwale 
• Freshwater wash down under gunwale
• Self bailing cockpit with large cockpit scuppers 
• Stainless steel gas pistons, all hatches and lids 
• Tuna door

RNC Yacht Group The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.